Name: HT SYS C2400200R48 Embedded Power System - DC Power… – Embedded DC Power System
Brand: Beijing High-tech Dynamic Power Co.,Ltd
SKU: HT-SYS-C2400200R48

HT SYS C2400200R48 Embedded Power System

Introduction

HT SYS C2400200R48 Embedded power system is a compact and intelligent power system, It can house up to 2*1.1KW rectifiers and 1*HT503 controller.
AC input, DC output and dry contact use front access and front operation.
With compact design, easy installation.
Two levels Low Voltage Disconnect (LVD) protection.
Two fuses for battery.
Compatible with rectifiers of the same size.

Applications

Fiber optic network
Access network
Satellite communication ground station
Transmission equipment
Mobile communication
ESS (Energy Storage System)

Features

19" 1U sub-rack, easy to be embedded into all standard telecom equipment.
Up to 2.2kW system capacity.
Up to 0.99 power factor.
Intelligent fan-cooling.
Rectifier modules hot-swap.
N+1 rectifier module redundancy.
Advanced batteries monitoring and management.
ECO mode.
High power density.

Applicable Standards

Applicable Standards
Electrical	IEC 60950-1, EN 60950-1, UL 60950-1
EMC	EN 55022 Class A

HT SYS C2400200R48 Embedded Power System — DC POWER SYSTEMS

Input
AC Input	80Vac-300Vac
Input Current	≤6.9A (Per rectifier)
Frequency	45~65Hz
THDi	<5%@full load, <10%@half load, Rated input and output voltage

Output
Output Voltage	-53.5V Rated output voltage
Output Current	-53.5V float voltage, -56.4V boost voltage, ≥40A
Voltage Regulation	≤±1%
Current Sharing	≤±5%
Efficiency	≥91%
Ripple and Noise	≤200mV Peak-Peak
Psophometric Noise	≤2mV

Other Specifications
Operating Temperature	-40°C to +70°C (-40°F to +158°F)
Storage Temperature	-40°C to +85°C (-40°F to +185°F)
Humidity	Operating: ≤95% non-condensing; Storage: ≤99% non-condensing
Dimensions (mm)	482.6W (19") x 44H (1U) x 279.5D
Weight	≤5kg (Without rectifier)
Protection Level	IP 20

Options
DC Distribution	510A/1P+220A/1P fuses for load, 2 fuse for battery, the rating of load fuse is 20A, BLVD & LLVD1 (Optional), Front operation and front connection
AC Distribution	AC input mode: 1*IEC C14 socket, Front access and Front connection
Low Voltage Disconnect	80A Bi-stable contactors should be used as BLVD
Output Protection	Short-circuit protection, Overload protection
Rectifier	HTP I 48-1100

Monitoring
Function	Operation information acquirements, battery and system management, system alarm, communicate with control center related ports
Controller	HT503
Dry Contact	2 relay outputs, NO+COM
Digital Input	2 DI
Interface	LCD
Temp Sensor	2